DigiCart/E Remote Control Cable Pinout

DigiCart/E Remote Control Cable Pinout

DigiCart/E Remote Control Cable Pinout

DigiCart/E RC-320

15 Pin D-Sub male SIGNAL 9 pin D Sub female
1 GND  1
2  +5 Volts (Not normally used)  2
 3  GND  3
 4 TX +  (DigiCart Transmitter, wire to RX+)  4
 5  TX –  (DigiCart Transmitter, wire to RX-)    5
 6  Remote Present Return (Not Used)  
 7   +12V   6
 8    GND  
 9   N/C  
 10   N/C  
 11  RX +  (DigiCart Receiver, wire to TX+)  8
 12  RX  –  (DigiCart Receiver, wire to TX-)  9
 13  Remote Present signal (Not Used)  
 14  +12V  7
 15  GND  

ALSO – Connect Pin 15 to Pin 1 and Pin 8 to Pin 3 on 15 pin connector side