HD MAXX RAID Setup

1. 1. Power on the Server.
   2. Enter BIOS setup by pressing [F2] at prompt.
   3. Change Quiet Boot to [Disabled].
   4. Press [F10] to save changes.
   5. Server will re-boot.
   6. Press [Alt–3] at prompt to enter 3ware setup.
   7. Press [Enter] twice.
   8. If there is an old array, it needs to be deleted before creating a new one.  To delete an old array, select it by pressing enter while it is highlighted.  An asterisk will appear next to it.  Press [Tab] to navigate to Delete Unit and press [Enter] to apply.
   9. Press [Tab] and select Create Unit.
   10. Select RAID Configuration.
       • For 1200HD  or 2470HD select RAID 5
       • For 2400HD select RAID 6.
   11. Select StorSave Profile and set to Performance.
   12.   Select Auto–Verify and set to Disabled.
   13.   Press [Tab] to select Advanced and press [Enter].
   14.   Set Drive Queuing Mode to Disabled.
   15.   [Tab] to OK and press [Enter].
   16.   Select OK, Type [Y] to enable Write Cache.
   17.   Press [F8] and type [Y] to Save and Exit.