SD MAXX RAID Setup

1. Power on server.
2. Press [Alt-3] at prompt.
3. Press any key to continue at prompt.
4. If necessary, delete any previous arrays with the following procedure:  Highlight array(s) you wish to delete with arrow keys.  Press [Enter] with array highlighted and an * will appear next to array.  Press [Tab] and select Delete Unit [Enter], and then OK [Enter].
5. Use [Tab] key to navigate to Available Drives window.
6. Use arrow keys to highlight and select each drive with the [Enter] key.  An * should appear next to each drive.
7. Press [Tab] and select Create Unit [Enter].
8. Press [Tab] and select RAID Configuration.  Press [Enter] and select RAID 5. Press [Enter] again.
9. Use arrow keys to select StorSave Profile [Enter].  Change to Balanced [Enter].
10.   Press [Tab] to select OK [Enter].
11.   Press [Y] at prompt to enable write cache.
12.   Press [F8] then [Y] to save and exit.
13.   If prompted, press [Esc] to clear previous disc content.